turkish english
POLYURETHANE THERMAL INSULATED ROOF AND WALL PANELS
 
 

İZMİT ENVIRONMENTAL PROJECT

TOP 0.70 mm TRAPEZOİDAL BOTTOM 0.50 mm ROLLFORMED
ALUMİNUM SHEETS FILLED WITH 50 mm POLYURETHANE
FOAM 10.000 m²

 

BARİÇ INDUSTRIAL BUILDING

EXTERIOR RAL 1001 , INTERIOR RAL 9002 GALVANIZED COATCOIL
POLYESTER PAINTED 40 mm POLYURETHANE WALL PANEL 1100 m²
TOP O.70 mm ALUMİNUM , BOTTOM 0.45 mm RAL 9002 GALVANIZED
COATCOIL POLYESTER PAINTED , 40 mm POLYÜRETHANE ROOF PANEL
4100 m²

 
     


By dispensing PUR between two rigid facings (aluminum, galvanized steel, glass reinforced plastics (GRP), etc.), light weight high strength incorporating thermal insulation panels are produced. Sandwich panels are used primarily as prefabricated exterior walls and roofs of buildings where thermal insulation and high bearing strength are needed. Panels are available in different sizes and widths.

POLYURETHANE THERMAL INSULATED ROOF AND WALL CLADDING PANELS

PANEL PROPERTIES
• Superior thermal insulation
• Properly calculated thermal thickness will prevent condensation
• Light in weight , high in load bearing strength
• Acoustical values
• Wide range choice of flushing and covering elements
• Ease of installation
• Minimum load on substructure

CHOICE OF VARIETIES
• Appropriate PUR thickness to ensure adequate thermal insulation.
• Roof panel minimum thickness starting from 30 mm., wall panel from 40 mm. upto 150 mm. Higher thicknesses are available upon demand .


THERMAL CONDUCTİVİTY DEPENDENT ON THICKNESS
PUR  mm 30 40 50 60 80
Kcal/m2.h.ºC 0.81 0.60 0.48 0.41 0.30

PÜRTİZ  has been manufacturing polyurethane sandwich panels for roof , wall cladding, and cold and frozen storage facilities since 1977.  
 
ROOF AND WALL PANEL FLUSHINGS

FLUSHINGS IN VARIOUS FORMS AND PROFILES ARE PRODUCED TO MEASURE SECURING THE FLOW OF RAIN WATER TO THE GUTTERS AND FINISH THE CLADDED PANEL ASSEMBLY AS DUST AND WATER FREE.

OTHER PROFILES AND ELEMENTS CAN BE PRODUCED TO SUIT THE ARCHITECTURAL DESIGNS.